• JA-63 "Profi" este o centrala programabila cu o arhitectura compacta. Prin programare, aceasta poate fi impartita in doua sectiuni de operare separate (cu o zona comuna). Are o sursa de alimentare incorporata si loc suficient pentru o baterie de back-up (12V, 1,3Ah sau 2.6Ah) in cutia centralei.

• Placa de baza a JA-63K are 4 intrari pe cablu cu trigerare programabila (NC, EOL sau dublu EOL) si reactii programabile.

• Modelul JA-63KR (echipat cu modul de comunicatie radio "R") are 16 zone fara fir. Pe fiecare zona se pot invata pana la 2 detectori JA-60 (cel mult 32 detectori). Modelul JA-63KR are, in total, 20 de zone (4 cu fir si 16 fara fir). De asemenea, se pot invata pana la 8 telecomenzi (control de la distanta pe linie telefonica sau tastaturi fara fir), o sirena JA-60 fara fir si un numar nelimitat de module de iesire fara fir din familia UC. Daca este nevoie de mai multe zone, se mai poate invata o centrala JA-6x ca subsistem (arhitectura Master sau Slave). Centrala master primeste informatii de la centrala subsistem, putand, de asemenea, arma sau dezarma aceasta centrala subsistem.

• Modulul telefonic "X" poate comunica cu un dispecerat de monitorizare, trimite 2 mesaje vocale, trimite 5 mesaje SMS prin serverul SMS. De asemenea, poate comunica cu un PC la distanta (folosind softul ComLink si un modem JA-60U).

• Operarea si programarea sunt posibile de la o tastatura JA-60E (fie direct cablata la centrala, fie de la distanta, folosind modemul JA-60U). Centrala echipata cu un modul radio (63KR, 63KRX) poate fi programata si operata de la o tastatura fara fir, precum si prin controale de la distanta pe linie telefonica R-11 sau R-22 sau prin tastatura de la distanta Ja-60D. Operarea si programarea sunt posibile si prin softul ComLink (local sau de la distanta prin modemul JA-60U).

• Alimentare - 230 Vca, max 0,1 A, supravegheata, clasa II

• Baterie de back-up - 12 V, de la 1,3 sau 2,6 Ah, durata normala de viata 5 ani

• Iesire de alimentare de back-up - 13Vcc, curent max permanent de 0,4 sau 1,2 A timp de cel mult 15 min (1 ciclu pe ora), autoconsum al centralei de 30mA

• Intrari pe cablu - 4 zone de intrare, trigerare selectabila: NC, rezistenta EOL sau EOL dublu

• Reactiile zonelor - selectabile: instantanee, cu intarziere, panica, de incendiu, 24 ore, la urmatoarea intarziere

• Zone fara fir ** - 16 zone (2 detectori pot fi invatati la fiecare zona = pana la 32 detectori in total)

• Frecventa de lucru ** - 433,92 MHz; cod saritor digital; comunicatie supravegheata

• Tastaturi - max. 4 tastaturi JA-60E pe fir, max. 8 tastaturi JA-60F fara fir** sau telecomenzi RC-11 sau JA-60D**

• Coduri de acces - Cod master si 14 coduri de utilizator. Cand sistemul este impartit, codurile, detectorii si telecomenzile pot fi adresate pe sectoare particulare

• Intrari pe cablu - Contacte uscate pe releu de alarmA 1A/60V; oesiri programabile PgX & PgY (Chime, Incendiu, Armare, Panica, Alarma, Usa, Casa, Cadere alimentare), iesire de sirena (12 V, 0,7 A)

• Iesiri fara fir ** - Centrala transmite semnale penru date de sirena si PgX, PgY pentru
UC-2xx

• Memorie de evenimente - Ultimele 127 evenimente, incluzand data, ora si specificatii detaliate

• Comunicator telefonic * - modul 65X: comunicatie digitala la dispeceratul de monitorizare, 5 mesaje text sau apelare pe pager, 2 mesaje vocale, comunicatie pe modem cu un PC la distanta (ComLink SW + JA-60U modem), acces de la distanta cu tastatura prin JA-60E si JA-60U

• Formate pentru dispeceratul de monitorizare * - Contact ID, Ademco, Telemax, Franklin, Radionics, SurGard, DTMF2300, (198 coduri de raportare)

* centrala echipata cu apelator telefonic JA-65X
** centrala fara fir (JA-63KR, JA-63KRX)

• Temperatura de operare -10°C la 40° C

• Umiditatea de operare - max 80 %

• Mediul de lucru - Utilizare in interior use (clasa II, EN 50131-1)

• Descarcare electrostatica - 8 kV

• Imunitate RF - 30 V / m

• Carcasa - Cutie de plastic cu sursa de alimentare incorporata

• Conform cu: EN 50131-1 (Nivelul 2), EN 50131-6, EN 300220, ETS 300 683, EN 50136, ETS 300001, TBR 21

• The JA-60F is an optional wireless keypad for the JA-60 or JA-65 series wireless control panel. It can operate the system in exactly the same way as a JA-60E wired keypad. The LED indicators, display and built-in buzzer indicate the alarm system's status. Multiple keypads and RC-11 remote controllers can be used with a control panel (max. 8 total). The keypad has a built in tamper sensor and it also checks the number of attempts to enter an access code (5 unsuccessful attempts will trigger a tamper alarm). The keypad performs regular self-testing and reports its conditions regularly to the system for full supervision. The JA-60F keypad can be used for control panel programming as well. Being wireless, it can help an installer to monitor the system functions when performing a "walk" test.

Specifications: • power supply: 6 V - 4 AAA alkaline batteries (50 uA) or 12 V DC / 100 mA power adaptor • battery life time: typ. 1 year • number of keypads in a system: max. 8 control devices • working range: max. 80 m (open area) • access codes: identical with control panel (1 +14) • working environment: indoor use, -10 to +40°C • complies with: EN 50131-1 grade 2, EN 300220

TELECOMANDA - RC-86 • The RC-86 is designed to remotely control setting/unsetting, trigger panic alarms, and control other appliances. The big advantage is the possibility of configuring it to 433 MHz (JA-60 systems, UC-216, UC-222 receivers etc). A two button version of the case is also available.

Detector de miscare: JA-60P Wireless • The JA-60P is an intruder detector designed to detect human body movement in a protected area. Digital processing insures a high immunity to false alarms and outstanding stability. The JA-60P uses a sophisticated radio communication protocol with a high level of data safety. • The detector makes regular auto testing and reports its conditions regularly to the system for full supervision. Built in tamper sensors trigger an alarm if there is any attempt to tamper with the detector. An automatic testing mode makes testing an ease.

Detector magnetic usa: JA-60N Wireless • The JA-60N magnetic door detector is equipped with a magnet. A movement of the magnet triggers the internal sensor in the detector. It can trigger an Instant or Delayed intruder alarm and it also has built in tamper sensors. There are inputs for external sensors available. • The JA-60N uses a sophisticated radio communication protocol with a high level of data safety. The detector makes regular auto testing and reports its conditions regularly to the system for full supervision. An automatic test mode makes testing an ease.

Detector geam spart: JA-60B Wireless • The JA-60B is a modern wireless glass-break detector that provides easy and reliable protection against robbery. It ensures extremely high reliability and false alarm immunity. One sensor covers an entire room, regardless of the number of windows. • A dual technology detection method (air pressure and sound analysis) is combined with digital processing to guarantee high sensitivity to the breaking of glass. A special test mode enables simple adjustments to the detector. Regular self testing is performed and the final result is transmitted to a control panel. Digital hopping code radio communication guarantees highly secure data transmission. The detector is also protected against tampering.

Detector miscare exterior: JA-60V Wireless • The JA-60V is an outdoor intruder detector designed to detect human body movement in a protected area. • The built-in PIR sensor is produced by Optex and has two double-layered detection patterns (upper and lower) both have to be activated to trigger the alarm. This reduces false alarms, particularly those caused by temperature changes, light reflection or small animals. A tamper triggers an alarm if there is any attempt to tamper with the detector. The built-in transmitter is fully compatible with all JA-6X control panels.

Detector fum : JA-63S Wireless • The new JA-63S replaces the now discontinued JA-60SP and JA-60SR fire detectors and is designed to detect the presence of fire inside residential or commercial buildings. • The battery-powered detector has a built-in local warning siren combined with a red LED indicator. • Fire alarm information can also be transferred via a wireless connection to JA-6X series security systems. • The JA-63S detector combines an optical smoke sensor with a heat sensor. Both sensors have their outgoing signals processed digitally, resulting in higher false-alarm immunity. The optical sensor works using a light diffusion principle and is very sensitive to the presence of large-sized particles which are characteristic of dense smokes. • Smoke/heat sensor participation is customisable by DIP switches (SMOKE ONLY,SMOKE OR HEAT,SMOKE AND HEAT,HEAT ONLY) • The JA-63S complies with EN 14 604, A2 EN 54-5, EN 50130-4, EN 55022, ERC REC 70-03 and the EU Construction Products Directive

Detector gaze: JA-60G Wireless • The JA-60G detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL, Hydrogen, etc). The detector detects two levels of gas concentration, responding with two different output reactions. • The main detector features are: high reliability and sensitivity, compact size, 230V (110V optional) power supply and long stability & lifetime. It has a built-in transmitter to wirelessly send an alarm signal.

• The UC-260 can be used as a wireless indoor siren, a melody doorbell or as a chime. It can also function as a small house alarm. The UC-260 is compatible with Jablotron wireless control panels (JA-6x), JA-60 wireless detectors and RC-4x, RC-22 and RC-28 remote controls.

• Several triggering devices can be used simultaneously and different melodies can be assigned to each device. Two different sound levels can be selected. The UC-260 provides entrance and exit delay chirps too, when used with a control panel.

Specifications: • Power supply: 230 V, 50 Hz • Power consumption: 1.5 W • Acoustics: 8 melodies and/or 110 dB/m alarm siren • Input wireless devices: max. 8 remote controls or detectors 1 control panel JA-60 or JA-65 • Class: II according to EN60950 • Working frequency: 433,92 MHz • Environmental conditions: interior -10 to +40°C • Safety standards: IP40 according to EN 60529, IEC 529

• The JA-63A siren is designed for outdoor use. It is powered by its own AC adapter and has a built in backup battery. The siren communicates wirelessly with the control panel (two way communication). It contains a high powered siren and a flashing light with a coloured lens.

• In addition to signaling alarms, it can also provide arming and disarm-ing chirps. The siren makes regular auto testing and reports its condi-tion regularly to the system for full supervision. Built in tamper sensors trigger an alarm if there is any attempt to tamper with the siren. Only one JA-63A siren can be used with a JA-6x control panel.

Specifications: • Power: 230VAC, 50Hz (optional 110)z • Back up battery: 6V, 1.3Ah • Working range: up to 100m (open area) • Siren: piezo electric, 118dB • Siren timer: 60 seconds • Flash light timer: 5 minutes • Cover: class IP44 • Working environment: outdoor use, -25 to +60°C • Complies with: EN 50131-1, class 2